Home Rocket Daily

Design Your Perfect Home Using Technology

Why Should you Steam Clean Furniture?

Untitled design (70)

Steam cleaning furniture is an excellent way to sanitize and remove dust, dirt, and other debris from furniture. It’s also a great way to extend the life of your furniture. Steam cleaning is a process that uses hot steam and a handheld steamer to loosen and remove the dirt and grime from your furniture, making it look like new again.

Benefits of Steam Cleaning Furniture

Remove dust mites and allergens

Using steam to clean furniture can help reduce microscopic bacteria, dust mites, and allergens that may be lurking on the surface of your upholstered furniture. Dust mites are one of the leading pollutants in any home and although they are too small to be seen with the naked eye, they can act as a major source of indoor air pollution. Allergens such as pollen and pet dander can also become trapped in fabrics over time and contribute to poor indoor air quality.

Steam cleaning is an effective way to remove these particles from fabric surfaces in a safe, chemical-free manner. The high temperature of steam will provide deep penetrating cleaning power which helps loosen embedded dirt and allergens from the fabric fibers so that they can be easily removed with a vacuum or cloth.

In addition to helping reduce indoor air pollutants, steam cleaning can also help refresh soiled upholstery by removing odors caused by pet stains or cigarette smoke.

Remove stubborn stains

Steam cleaning is a great way to remove tough and stubborn stains from upholstered furniture, drapery and carpets. With the help of high-temperature steam that penetrates deeper into the fabric fibers, you can effectively get rid of dirt and grime that vacuum cleaners may not be able to remove. Steam cleaning also helps to kill bacteria and dust mites as well as reduce the risk of getting allergies caused by these microscopic organisms.

Steam cleaning is also safe for furniture with delicate fabrics such as velvet or silks as it doesn’t damage them like conventional washing does. The steam heat is gentle enough to loosen the dirt without affecting the material while its small jets provide a thorough coverage at difficult angles. In addition, it can be used on both dark and light fabrics without fear of discoloration.

Kills bacteria and germs

Steam cleaning is a reliable method for thoroughly killing bacteria, germs, and dust mites living on furniture. It works by using pressurized steam to liquefy home allergens and dirt particles. The power of the steam combines with an environmentally-friendly cleaning solution to act as a deodorizer.

Besides killing allergens and other harmful biological agents, steam cleans indoors by lifting dust from even the deepest crevasses in furniture fabrics or carpet fibers to further eliminate their presence in the home environment or commercial space. As a result of this deep cleaning process, all remaining dirt is removed without exerting too much effort or leaving any residues on the surface of the furniture.

Additionally, the chemicals used in this process are completely safe and won’t leave behind any traces in the air due to their organic nature which makes it ideal for those who suffer from respiratory allergies.

Steps to Steam Clean Furniture at Home

Steam cleaning furniture is a great way to make sure your furniture is looking and feeling its best. This technique is fast and easy, and it’s much less harsh than other cleaning methods. Here, we’ll show you exactly how to steam clean furniture right at home, so you can get rid of dirt, grime, and odors in no time.

  1. Fill a steam cleaner with water according to the manufacturer’s instructions.
  2. Turn on the steam cleaner and wait for it to heat up.
  3. Test a small, inconspicuous area of the furniture to make sure the steam is not too hot.
  4. Start steaming the furniture, going with the grain of the fabric.
  5. If there are any tough stains, use a brush attachment to scrub them away.
  6. Once you have finished steaming the entire piece of furniture, use a clean, dry cloth to wipe away any excess moisture.

Prepare the area and furniture

Preparing the area and furniture is an essential step before you start the steam cleaning process. To prepare, it is necessary to take into account the size of the furniture, as laying down tarps or protective cloths to protect your flooring and other furniture against water damage will be necessary for larger pieces.

In addition, you should remove any cushions or covers from pieces that have them. Finally, make sure you clean up any surface dirt from furniture before you begin steaming by vacuuming or brushing off dust and crumbs. Once completed, your space is ready for steaming!

Assemble the steam cleaner

The first step in steam cleaning furniture is assembling the steam cleaner. Make sure that the cooker unit and tank come with lids and seals if they’re separate or preassembled. If it’s not secure, it can be dangerous to operate the machine which can cause burns or other injuries.

Add water to the holder tank according to instructions, taking into account the amount of furniture to be steamed cleaned. Then attach the appropriate brush head for each type of fabric or for any stains or dirt buildup on your furniture using either:

  • A scrubbing brush
  • An upholstery brush
  • A dusting pad
  • A clothing-lint remover attachment
  • A squeegee head attachment
  • A carpet brush head attachment

If needed, add an additional cleaning solution to the steam cleaner’s reservoir according to instructions (check all chemical usage recommendations).

Test the steam cleaner on a hidden area

Before cleaning, test the steam cleaner on a hidden area of the furniture to make sure that the material is not adversely affected. This can help you avoid damaging any of your precious items, as well as give you confidence in knowing how the steam cleaner works on particular materials.

The instructions that come with your steam cleaner should provide information on which materials you should avoid because they may become damaged from powerful steam cleaning. It’s also wise to keep any plastic or glass objects away from the furniture before steaming to ensure their safety.

Start steam cleaning the furniture

Starting to steam clean furniture can be a simple and effective way to clean large pieces of upholstered furniture. It is important to be familiar with the manufacturer’s care instructions before you start. It may also be necessary to test an inconspicuous area first to avoid any damage.

Before you begin, make sure that the furniture has been vacuumed or brushed off thoroughly, as this will reduce the amount of time that it takes to steam clean and it will make sure that any loose dirt and grime are removed.

Begin by filling the steam cleaner with distilled water, not regular tap water. The distillation process removes impurities from the water and makes it less likely that mineral deposits from the tap water will build up in the boiler of your cleaner. Also, remove all loose cushions and pillows from your furniture before you begin cleaning them with a steam cleaner.

To start steaming your furniture, select a cleaning solution that is specifically designed for use in your model of steam cleaner. It may also be useful to add a few drops of mild or scented detergent which will help increase lifting power on deeper embedded stains and odors on thicker fabrics such as velvet or velour upholstery fabric. Only use detergent if indicated in the manufacturer guidelines for your machine – some machine aspects may not work correctly when using detergent in combination with plain distilled water so always double check first!

When steaming furniture it’s important to keep constant motion at all times so that no one area is exposed for too long – this could result in damaging fabrics or even worse – scorching! Always spot test first on an inconspicuous area before commencing over larger areas, this helps protect against any unexpected colour run or shrinkage after cleaning has finished as a result of chemicals present when mixing together different cleaners and detergents at home something which is usually unforeseen but can unfortunately happen if precautions are not taken! Keep alert while doing so just in case fabric becomes dry enough where ironing may be required afterwards when finished cleaning complete fabric section successfully afterwarding pressing with warm damp cloth elsewhere helps actuate temperature difference where heat needs refreshening spot test should prove helpful once again here too!

How to steam clean furniture at home

Steam cleaning furniture can be a great way to keep your furniture looking clean and fresh and to maintain good hygiene. Not only does it remove dust, dirt, and bacteria, but it can also sanitize and deodorize fabrics.

If you want to learn how to steam clean furniture at home, then this article will provide you with some useful tips:

Vacuum the furniture before steam cleaning

Before steam cleaning furniture, it is important to prepare the area by using a vacuum cleaner to remove any dirt, dust and debris that may have accumulated over time. Not only can such particles interfere with the cleaning process, but they can also damage the furniture if not removed prior to steam cleaning.

Vacuum attachments can help to get into little crevices and corners that are often difficult to access, so be sure to take care of those areas as well. Additionally, it may help to use an upholstery attachment on delicate fabric surfaces. Doing these steps ahead of time will help ensure a thorough clean and reduce the risk of inadvertent damage during steam cleaning.

Move the furniture to a well-ventilated area

When planning to steam clean furniture, it is important to move the furniture to a well-ventilated area. Proper ventilation allows the steam to dry completely, thus avoiding further damage and deterioration of the fabric. Avoid using damp towels on the furniture during mop-up – the trapped moisture can worsen mildew growth, causing odors and other problems. The sooner wipedown is complete, the fewer materials will be affected by high humidity and moisture.

When vacuuming furniture to prepare for steam cleaning, clean the dust and debris from all surfaces. Take special care around areas that are prone to bad odors or soil buildup due to pets or children’s activities. Thoroughly remove dust from between crevices and close seams where dirt can hide. Be sure not to put too much stress on delicate fabrics as you vacuum over them – you don’t want accidental tears or loosened stitching!

Make sure that when arranging for steam cleaning, discuss which materials in your home may be especially sensitive or delicate before beginning any treatment process – for instance, silk rugs or velvet sofa covers should receive extra protection either by avoiding steaming altogether or dealing with those items separately at lower temperatures with less pressurized steam jets. Taking these precautions will ensure better results while protecting your valued belongings!

Use a damp cloth to wipe off excess moisture

When steam cleaning furniture, it is important to use the right techniques to avoid damage. One common technique used with steam cleaning is wiping off any remaining moisture after the steam has been applied. This should be done with a damp cloth or sponge. The purpose of this is to eliminate any residual moisture that may remain after steaming has been completed. This helps reduce the risk of mold and mildew forming because excess moisture may promote their growth. Additionally, residual moisture may cause discoloration or even warping in some types of furniture materials.

Taking just a few minutes afterwards to wipe off any remaining moisture can help ensure that your furniture stays in good condition for a longer period of time.

Aftercare Tips

Steam cleaning furniture is an effective way to keep furniture looking and feeling great. Steam cleaning can help remove dirt, dust, and stains, while also killing dust mites, dust mite eggs, and even some types of bacteria.

After you’ve steam cleaned your furniture, it’s important to take steps to ensure that your furniture stays in the best condition possible. In this article, we’ll discuss some aftercare tips to help you maintain your steam-cleaned furniture:

Allow the furniture to air dry completely

To ensure your furniture is returned to its original beauty, allow it to air dry completely. This will prevent any bacterial growth due to the warm, damp conditions that steam can produce. The ideal environment for bacteria is between 65-100°F (18-38°C) with a humidity of 40-90%.

If allowed to air dry properly in a cool and dry area after being steam cleaned, this will help prevent the increased risk of bacterial and mold growth.

It’s important not to leave upholstered furniture wet or damp after steam cleaning as this can cause discoloration or dull the finish of certain fabrics over time. Allow the furniture to fully air dry until it feels completely cool and all moisture appears to have been removed. It typically takes at least 2-3 days for pieces of furniture that were heavily saturated with steam cleaning solutions to completely dry out.

Apply a coat of furniture polish

Applying a coat of furniture polish to leather, fabric, and other surfaces not only protects the furniture from dirt, dust and stains – it helps keep furniture looking as good as new. Choose a quality polish that is specifically designed for the type of upholstery used on your furniture.

For leather furniture, test the polish on an inconspicuous area to decide if the product is right for your particular piece. Many brands are available but always choose one made specifically for your type of upholstery’s texture and stability characteristics. When polishing leather furniture, give it a light coating using a soft cloth or foam applicator pad designed to protect the finish from scratches. Use as directed by the manufacturer’s instructions and avoid over saturating the cloth during application.

Fabric-covered furniture may require differing maintenance routines to keep its original beauty intact; like regular vacuuming or dry cleaning in some cases. Prices may vary depending on fabric type; check with your manufacturer before investing in softeners, conditioners or cleansers that can easily damage certain fabrics over time. For example, most couches should not be cleaned or steamed mechanically or chemically because of additional moisture build-up within their seams or cushions; use caution when choosing products for these types of pieces regardless of brand recommendation!

Vacuum the furniture again after it has dried

Once your furniture is dry, it’s important to vacuum the fabric again to remove any remaining dirt or debris. The steam cleaning method penetrates deep into the fabric and may have loosened unseen dirt and dust particles from the deeper layers of your furniture. Vacuuming afterward is beneficial in eliminating those particles and restoring your furniture’s plush feel.

To ensure a thorough result, choose an upholstery brush attachment with your vacuum cleaner as this will more effectively lift away dirt and allergens. Once you’ve finished vacuuming, inspect the fabric for any remaining stains or spots that may need additional treatment.